43 D
HAND TOOLS
ATD-4094
5 PC. MISC. HAMMER SET (4045) WITH FREE 14 PC. PUNCH AND CHISEL SET (714)
ATD-4095
ATD-4096
High impact hammers with comfort grip handles DEAD BLOW HAMMERS
Cutaway showing steel bars and locking plates
$36.29 VALUE ATD-714
ATD-4082
$39.99
3 Pc. Dead Blow Hammer Set 8 oz., 1 lbs. and 2 lbs.
Four spring steel bars run all the way through the handle and are locked in the hammer head using steel locking plates. A special bonding process ensures that the head will never become dislodges from the handle. The ergonomic rubber grip handle absorbs vibration and reduces fatigue. *There are two spring steel bars in the ATD-4048 handle. INDESTRUCTIBLE HANDLE HAMMERS
ATD-4038
FIBERGLASS HANDLE HAMMER SETS
Drop forged, polished steel heads that exceed ANSI specs
ATD-4048 ATD-4076 ATD-4078
$59.89 $82.39 $85.99
48 oz. Ball Pein Hammer - 14”Handle
ATD-4045 ATD-4035
$95.49 $72.89
5 Pc. Miscellaneous Hammer Set
16 oz. Ball Pein, 32 oz. Ball Pein, 3 lbs. Sledge, 3 lbs. Cross Pein and 32 oz. Rubber Mallet
6 lbs. Sledge Hammer - 16”Handle
5 Pc. Ball Pein Hammer Set
8 oz., 12 oz., 16 oz., 24 oz. znd 32 oz. Ball Pein Hammers
8 lbs. Sledge Hammer - 12”Handle
714 (SET)
PUNCHES & CHISELS
Forged chrome vanadium steel polished to a smooth finish and tempered for strength. All ATD punches and chisels are fully guaranteed against defective material and workmanship. Number Description Includes ATD-4075 3 Pc. Non-Sparking Brass Punch Set Pin: 1/4”x 4”and 3/8”x 6”; Drift: 1/2”x 8”
Price
WLT-11111
$22.89 $23.59 $16.19 $18.79 $30.89
ATD-759 ATD-761 ATD-762 ATD-760
3 Pc. Long Taper Punch Set
Long Tapers: 3/16”, 1/4”and 5/16”
5 Pc. Pin Punch Set
Pin: 1/8”, 5/32”, 3/16”and 1/4”; Solid: 1/4”; Center: 3/8”
WLT-21236
5 Pc. Roll Pin Punch Set
Roll Punches: 1/8”, 5/32”, 3/16”, 1/4”and 5/16”
8 Pc. Punch and Chisel Set
Pin: 1/8”, 3/16”and 1/4”; Solid: 1/4”; Center: 3/8”; Cold Chisels: 1/2”, 5/8”and 3/4”
WLT-11109 (SET)
Pin: 3/16”x 3/8”x 6”, 1/8”x 3/8”x 5”, 3/32”x 3/8”x 5”and 1/4”x 1/2”x 6”; Center: 1/8” x 3/8”x 5”; Taper: 3/8”x 5/8”x 10”, 5/32”x 1/2”x 9”, 1/8”x 1/2”x 10”and 1/8”x 3/8”x 8-1/2”; Cold Chisels: 1/2”, 5/8”, 7/8”and 1” Pin: 3/32”, 1/8”, 5/32”, 3/16”1/4”and 5/16”; Starter: 1/8”, 5/32”, 3/16”, 1/4”and 5/16”; Center: 1/4”, 3/8”and 1/2”; Flat Chisels: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”and 7/8” Pin: 3/32”–3/8”; Starter: 3/32”–5/16”; Cap Chisels: 1/4”and 5/16”; Center Punches: 1/4”–1/2”; Diamond Point Chisel: 5/16”and 3/8”; Half Round Nose Chisel: 5/16”; Flat Chisels: 1/4”–7/8”
$36.29
ATD-714
14 Pc. Punch and Chisel Set
Number
Description
Length
Material
Face Dia.
Price
$47.69
ATD-720
20 Pc. Punch and Chisel Set
B.A.S.H HAMMER KITS ® WLT-55830 8 lbs. BASH® Dead Blow Hammer WLT-11111 3 Pc. BASH® Hammer Kit WLT-20836 8 lbs. BASH® Sledge Hammer WLT-21236 12 lbs. BASH® Sledge Hammer WLT-55114 24 oz. BASH® Dead Blow Hammer WLT-55214 32 oz. BASH® Dead Blow Hammer WLT-55314 48 oz. BASH® Dead Blow Hammer WLT-55416 64 oz. BASH® Dead Blow Hammer
$112.49 $149.99 $42.95 $47.95 $53.69 $75.49 $107.49
38”
Rubber/Steel
3”
38”
Rubber/Steel
3”
$64.19
ATD-729
29 Pc. Punch and Chisel Set
13-1/2”
Rubber/Steel
1-1/2”
• 16”length for increases access to hard-to-reach areas • Pin diameter sizes: 1/4”, 5/16”and 3/8” • High carbon molybendum tool steel with striker cap 3 PC. EXTRA LONG PIN PUNCH SET
14”
Rubber/Steel
1-3/4”
14”
Rubber/Steel
1-7/8”
16-1/2”
Rubber/Steel
2-1/4”
KAS-856-3ST............ $57.95
31-1/2”
Rubber/Steel
2-5/8”
12”
5 PC. PRY BAR SET Set Includes: • 12”, 17”, 25”, 31” and 36” Pry Bars
63905 (SET)
17”
$119.95
Includes: 4 lbs., 12”BASH® Sledge Hammer, 32 oz., 14”BASH® Ball Pein Hammer and 2 lbs., 16”BASH® Cross Pein Hammer Includes: 2 lbs./14”; 3 lbs./14”and 4 lbs./16”BASH® Dead Blow Hammers Includes: 2-1/2 lbs./12” and 4 lbs./12” BASH® Sledge Hammers; 1-1/2 lbs./14” and 2 lbs./14”BASH® Dead Blow Hammers; 2 lbs./16”BASH® Cross Pein Hammer and 1-1/2 lbs./14”BASH® Ball Pein Hammer
25”
ATD Pry Bar Features: • High impact, chemical resistant handles with strike cap ATD-63905. ................. $84.39
31”
STRIKE CAP
WLT-11113 3 Pc. BASH® Dead Blow Hammer Kit WLT-11109 6 Pc. BASH® Master Hammer Set
$143.59
36”
$244.79
• Shank extends the entire length of the handle to the strike cap • Exceptional leverage for use in the most demanding applications • High strength steel shanks resist flexing and provide enhanced durability • Made in USA
3 PC. PRY BAR SET
12”
Set Includes: • 12”, 17” and 25” Pry Bars
17”
63903 (SET)
3 PC. DEAD BLOW HAMMER SET • (1) 12 oz. Brass Hammer with brass non-sparking platted cap for use on soft metals / panels • (1) 1 lb. Ball Pein Hammer with steel plated cap for use with striking punches and chisels shaping and straightening unhardened metals • (1) 1/2 lb. Dead Blow Hammer for use with non-marring and non-sparking applications • Shock absorbing steel shot filled canister for maximum force with reduced rebound
ATD-63903. ................. $43.29
25”
INDEXABLE PRY BARS
Item # KDT-82210 KDT-82216 KDT-82233 KDT-82300
Description
Price
$46.19 $57.59 $99.99 $86.95
82300 (SET)
10” Smooth Profile 16” Smooth Profile
33” Grooved, for added traction 2 Pc. Set - Includes 8” & 16” Pry Bars
TIT-63133...................................... $33.99
Made with FlippingBook flipbook maker