UNDER HOOD 49 D
11-PC. OXYGEN SENSOR & SENDING UNIT SOCKET SET Features: • For removal and installation of oxygen sensors, oil pressure sending units and vacuum switches • For use on most domestic and imported vehicles • Made of high quality chrome vanadium and chrome moly steel • For use with 3/8”and 1/2”Dr. ratchets Includes 1 each: • 1/2”Dr. 29mm x 90mm Oxygen Sensor Socket • 3/8”Dr. 7/8”x 90mm Oxygen Sensor Socket • 1/2”Dr. 27mm x 79mm Fuel Injector Socket • 3/8”Dr. 7/8”x 80mmVacuum Switch Socket • 3/8”Dr. 1-1/16”x 74mm Oil Sending Unit Socket • 1/2”Dr. 7/8”x 50mm Oxygen Sensor Socket • 3/8”Dr. 7/8”x 30mm Offset Oxygen SensorWrench • 1/2”Dr. 22mm SpecialTube Socket • 2-1/8”Offset Oxygen SensorWrench • 1/2”Dr. Deep Oxygen Sensor Socket • Oxygen SensorThread Chaser
PNEUMATIC FAN CLUTCH WRENCH SET
FAN CLUTCH WRENCH SERVICE KIT Removes and installs the fan clutch on many models when repairing or replacing water pump, timing chain, or the fan clutch. Kit includes: Universal Pully Holder with pin set (5x8mm); 22mm Fan ClutchWrench. 36mm Fan ClutchWrench - used to remove and replace the thermostatic fan assembly on: Ford 4.9L E and F Series truck engines (1984-1993); Ford 4.6L modular engines; Ford 2.8L engines (1984-1987); Ford 2.9-3.0L engines (1988-current); Ford 4.0L engines (1990-current). 40mm Fan ClutchWrench - used to remove and replace the thermostatic fan assembly on Ford 4.9L (1993 to current). 40mm Fan ClutchWrench - used to remove and replace the thermostatic fan assembly on Ford 4.9L (1993 to current). 47mm Fan ClutchWrench - used to remove and replace the thermostatic fan assembly on Ford Diesels. Quickly removes and installs fan clutch when repairing the water pump or fan clutch. Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary. Set includes (7) driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8”, 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6.0L and 6.4L Powerstroke diesel pickup. 1-7/8”and 2”are also included in the set. Use with an air hammer. Includes blow molded storage case. KAS-41570........................ $122.79 LIS-43300................................ $168.89
ATD-5666. ................................. $89.79
OXYGEN SENSOR WRENCH • 6 and 12 point with flex head • Works on all oxygen sensors with 7/8” hex • 9” handle length
6 pt.
12 pt.
ATD-5665. ................................. $32.39
FLYWHEEL LOCKING TOOL FOR 6.6L DURAMAX
Holds the timing chain and gear in place while removing or installing water pump on Ecotec engines. WATER PUMP SPROCKET HOLDER - ECOTEC
Works on 6.6L Duramax engines with Allison automatic transmissions
$43.80 LIS-22100
$34.29 LIS-13800
GAS TANK FUEL PUMP REMOVAL TOOL Adjustable design fits most plastic retaining rings LOC-940.............. $21.95
IPR SOCKET FOR FORD 6.0L AND INTERNATIONAL DIESEL Slot in tool has been modified to fit larger connectors on injector pressure regulators found on International diesels. The tool is built to bottom out on the regulator hex so it does not put torque on the connector in case the regulator can be reused. Use with 3/8” square drive .
FAN CLUTCH WRENCH SET Removes and installs the fan clutch on many models when repairing or replacing water pump, timing chain, or the fan clutch. Set includes: Universal Pully Holder with pin set (5x8mm); 36mm fan
KAS-3472.................................. $53.95
FORD DIESEL FUEL FILTER WRENCH
15 PC. RATCHETING SERPENTINE BELT TOOL SET
$25.95 LIS-68210
• For Ford power stroke and International/Navistar • Low-profile design for easy access in tight quarters • Diesel engine fuel filters ATD-5405. .......... $12.99
SERPENTINE BELT TOOL 6-in-1 FAN CLUTCH WRENCH • Combines the (6) most commonly used wrench sizes onto one double-end wrench and eliminates the guess work of sizing • Offset wrenches provide better hand alignment and a clearer line of sight, while improving accessibility in tight fan clutch areas • Square drive cut-outs designed for use with a breaker bar for added torque or length Releases tension on serpentine belts with a spring loaded idler pulley. Fits idler pulleys requiring 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and both 3/8” and 1/2” square drive sizes. For applications with limited access, 13mm and 16mm sockets are built into the handle. Comes with extension for hard-to-reach idler pulleys. (8) low profile sockets and extension help to fit into tight spots. LIS-59800....................................$59.49 KAS-3406...................................$32.95 • Combination removal and installation tool for most stretch belt applications found on many accessory drive systems • Unique magnetic faces hold the tool in place on the pulley, helping prevent damage to belt or pulley during removal or installation. • Compact, one-piece tool can be used on the front or back side of the pulley STRETCH BELT REMOVER/INSTALLER Patented tool combines the innovation of a GearWrench® ratcheting wrench with the requirements of the serpentine belt removal tool to provide the professional with the best possible combination. Includes: 6 Point Sockets: 13, 14, 15, 16, 17, 18 and 19mm; Crowsfoot: 13, 14 and 15mm; DriveTools: Long Bar; Special GearWrench® Ratcheting Wrench; 3/8”, 1/2”and 3/4”Adapters KDT-3680. ...................................$99.99
VARIABLE PIN SPANNER WRENCH
• Adjusts from 1-1/4” to 5” • Use with 1/2” drive ratchet or breaker bar
• Universal design ensures that it will fit on a wide variety of pulleys that feature holes or slots, including both crankshaft and camshaft pulleys • Accommodates the most common metric size pin configurations including: 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 7mm and 10mm ATD-8614. ..........................................$82.79
• 22mm • 36mm • 48mm • 32mm • 40mm • 50mm
DUAL OVERHEAD CAM (DOHC) LOCK TOOL
UNIVERSAL CAMSHAFT BEARING TOOL LIS-36880............................................ $35.29 This versatile tool easily locks and holds both camshaft sprockets firmly in place. Unique design uses knurled pins to hold against the inside of the cam sprockets.The two parallel bars "float" which allows the knurled pins to align with the sprockets. Preserves the engine timing during belt or chain replacement.
ACCOMMODATES THE 6 MOST COMMONLY USED WRENCH SIZES
STRETCH BELT INSTALLATION TOOL ATD-8607. ............... $17.95 LIS-59370.................................. $20.49
One complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks. Range of 1.125”to 2.69”(28.58 - 68.3mm). EASY ON BEARINGS.The expander has a neoprene sleeve over which the split driving plugs are mounted and expanded to size. This tool has (2) sets of rubber sleeves supplied for each expanding driver. Use brown sleeves when driving thin wall bearings (.065). Use black sleeves when driving thick wall bearings (.090). Instruction sheet provides complete, illustrated operating instructions and parts list. Range 1.125”to 2.690”. Includes: Driving shaft, driving shaft extension, expander unit, (5) split driving plugs, (2) driving collars, centering cone and molded case.
Quickly install new style stretch belts on late model vehicles without damaging the belt EUROPEAN STRETCH BELT TOOL ATD-8608. ............... $18.29
LIS-18000.......................................... $219.95
ATD-8607
ATD-8608
Made with FlippingBook flipbook maker