67 D
BRAKE & WHEEL
AIR BRAKE SERVICE TOOL KIT Features: • Removal tools for slack adjusters and push-rod clevis pins used on brake systems of class 7 and 8 vehicles • Works on manual and automatic slack adjusters • Includes 2 slack adjuster pullers and a brake clevis pin press ATD-5164. .................$187.29
• (5) adapters for 2- and 4-wheel disc brake assemblies of most cars • May be used on or off the car • Helps prevent damage to the piston and boot UNIVERSAL DISC BRAKE CALIPER TOOL
LIS-25000...................... $89.49
• For use on most domestic and import 2WD and 4WD vehicles • Use on front or rear disc brakes • Includes tools and adapters for both right- and left-handed threads 18 PC. DISC BRAKE CALIPER TOOL SET LIS-29090...................................$76.39 Includes an 11-1/2” long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Use flanged end to install and tapered end to remove. Also removes truck leaf spring bushings. 2 PC. TRUCK ANCHOR PIN BUSHING DRIVER
HEAVY-DUTY BEARING RACE AND SEAL DRIVER SET
Fits most Class 8 over the road trucks and trailers, and some medium duty trucks. • Use the tapered driver side for bearing races and the flat side for seals. Includes (6) drivers and handle extension for driving bearing races and seals on hubs with deep brake drums without removing the drums. • Range: 3-43/64” to 6”
FWD BEARING ADAPTER KIT These front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly intact on the vehicle, eliminating the need for front end alignment once the service work is done. • For front wheel drive cars and light trucks • Black oxide finish • Custom case for storage LIS-61900.................................$219.95
• Prevents damage to brake piston and boot • Use on main brakes and parking brake systems
$79.99 ATD-5165
• Works on small and medium single piston brake calipers found in subcompact to midsize cars with single piston calipers • Size Range: .95” to 2.25” (compared to 1.5” to 3” on the Lang 279) • ACME screw for durability and performance over time SMALL BRAKE CALIPER PRESS for Subcompact to Midsize Vehicles
ATD-8625. ................................ $110.39
• Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers • Size Range: 1.5” to 3” • Made in USA BRAKE CALIPER PRESS KAS-279........................ $56.59 KAS-277........................ $56.59
• (11) drivers to fit automobiles and trucks up to 1 Ton • Drivers can be used on bearing races and seals • Range: 1-1/2” to 4-1/2” • (2) handles, (1) for hammering and (1) for use with an air hammer MASTER PNEUMATIC BEARING RACE AND SEAL DRIVER SET
KAS-277
SLACK ADJUSTERS
LIS-12800.................................$119.95
7578
8569
4651 (both tools)
10 PC. BEARING RACE AND SEAL DRIVER KIT
KAS-4651 Rockwell/Arvin Meritor Slack Adjuster Release Tool & Wrench
$51.95 $40.59 $27.69
KAS-8569 9/16” Bendix Slack Adjuster Wrench
KAS-7578
• Includes driver handle and (9) adapter sizes • Range: 1-1/2” to 3” • Easier to install bearing races and seals without damage to race, axle housing or brake rotors
7/16” Haldex Slack Adjuster Wrench
DISC BRAKE SPREADER
DISC BRAKE PISTON TOOL • Rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with four wheel disc brakes • Will work on most import, Ford, Chrysler and some GM models
10 PC. BEARING RACE AND SEAL DRIVER MASTER KIT ATD-8622. ..................................$73.89
• Change disc brake pads quickly and easily • Spreader will compress the inner pad and reset the piston for easy pad replacement • Heavy-duty construction
Easier to insert wheel bearing race & seals without damage to race & axle housing • (9) drivers to fit most common wheel bearings and molded case • Range: 1-1/2” to 3”
ATD-5050. .................$8.99
CAUTION: DO NOT USE WITH POWER TOOLS
ATD-5060. ................. $9.19
SPEEDY BRAKE PAD SPREADER • Compresses brake pad in seconds making brake pad replacement an easy job
LIS-12980...................................$79.95
DUAL PISTON BRAKE CALIPER COMPRESSOR
2 PC. SEAL PULLER SET • Pin location affects the positioning of the tool
• Greater surface area on hook prevents seal puller from ripping through the seal Set Includes: Small and large sized pullers for use with 3/8” breaker bar or ratchet; 2” and 4” pins for various diameter seals KAS-850.....................................$20.49
• Compresses brake piston in seconds making dual piston pad replacement an easy job
LIS-24300....... $45.19
LIS-25750................ $52.69
TRUCK WHEEL PAN
Prevents oil mess during wheel repair.The pan fits rims with 13-3/4” ID and larger. Handle compartments hold hub nuts out of the oil. Made of polypropylene for durability. Will not warp if oil is warm.
2-IN-1 S-CAM BRAKE TOOL Comprised of a steel shaft with a U-shaped fork on one end to stretch the retaining spring so that both halves of the brake shoe are held together, which enables the user to hook up the pin. An S-shaped device on the opposite end enables the user to position the brake shoes in a way that allows leverage for installation of the rollers. The hooked end pulls the brake shoes apart so that the rollers can be installed faster and more safely.
$15.59 LIS-19852
ATD-5163. ...............$31.19
Made with FlippingBook flipbook maker