WBC Feeding Tables for all Wild Birds BIRD TABLES Flat Packed
WBC Harlow
WBC Rose
WBC Bridge
WBC Bird Tables are Flat Packed For Ease of Delivery
WBC Bridge, Harlow or Rose Bird Table are a great way to feed birds all year round and looks good in the garden. The roof protects the bird food from getting wet in the rain. Place the bird table away from hedges or fences to protect the birds from predators. Remove old food when replacing it and thoroughly clean the bird table once a week with a mild disinfectant to prevent disease. Move the bird table occasionally to prevent a build-up of bird droppings underneath.
wildlife
Wildlife and birdcare bird table assembly instructions for all our designs
birdcare
Parts and Components
Arrives in Two Boxes Square Box 1
30 mm screws
Long Box 2
10
From the top, screw the table xing plate into place with the two 70mm screws provided and the single 80mm as shown. This will secure the plate to the leg through the pre-drilled holes. 3. Screwing the Fixing Plate To the Leg
80mm Screw
70 mm screws
2
Leg Braces x 4 Cross Over Feet x 2
Bird Table x 1 Table Fixing Plate x1
Nature Recovery Project (CiC) A Business For Good We Care For Nature And People!
80 mm screws
1
4
Bolts and Nuts
Power Tools and Hand Tools Recommended Power Drill with screw bit and Spanner
Using the 4 bolts and nuts provided place the bolt from the top into position lining up the table and the xing plate. Tighten the nuts from underneath. Repeat 4 times. 4. Bolt the bird table to the Fixing Plate
70mm Screws
1. Feet Assembly
Cross the feet sections and then using 2 x 30mm screws, screw into the pre-drilled holes through the centre of the upper foot to the lower foot to secure the feet as a cross. Then from the underneath of the feet attach the cross to the leg with a single 80mm screw from the bottom up, in the pre-drilled hole.
Bird Table x 1
Bird Table Complete
30mm Screws
Table Fixing Plate x 1
2. Adding Leg Braces
To add the leg braces as shown attach with the 8 screws provided. Add a single brace to each side of the table leg x the bottom to the feet and top part of the brace to the leg using the pre-drilled holes and matching numbers. (ie: 1-1, 2-2 etc).
Leg Brace x4
80mm Screw
Table Leg x1
30mm Screws
30mm Screws
Cross over Feet x2
30mm Screws
30mm Screws
Made with FlippingBook - Share PDF online