1.3.2.2 Face Shields For use in areas where product / chemical splashes pose a greater than average hazard or when handling very corrosive material such as strong acids or bases where protection beyond that of goggles is required. Face shields are NOT to be worn independently of safety goggles. Their purpose is to provide additional protection to the face and are not designed as a substitute for goggles. 1.3.2.3 Gloves Hand protection is extremely important as the parts are irreplaceable. Additionally, many petroleum products are ingested into the body through the skin and the hands are the primary contact point for any material.
Molded Handwear
Nitrile gloves are rated for medium to heavy duty use and provide above average abrasion and puncture resistance for use with chlorinated, aromatic and petroleum-based solvents, most alcohols, salts detergents and acids. Not recommended for use with methyl ethyl ketone (MEK); otherwise, a good choice for standard issue. Disposable gloves are not recommended for most field applications as their construction does not usually provide sufficient tear and puncture resistance. 1.3.2.4 Shoes All employees are required to wear safety shoes when working in a "field environment". They may be in the style of shoes or boots, provided that they meet local or national requirements 1.3.2.5 Uniform All employees are issued an SGS Uniform. This may in the form of coveralls or shirt and pants. Depending upon your location, they may also be constructed of a flame-retardant material such as NOMEX. You are required to wear your uniform whenever you are working.
121/2” length rough finish
121/2” length embossed finish
151/2” length embossed finish
161/2” length rough finish
Gloves come in all types, shapes and sizes, with as many different applications. When choosing a type of glove, you should be guided by the following: Cotton or woolen gloves must not be used except as inner liners for cold weather or as part of a thermal liner for handling hot materials such as asphalt: and must be fully covered by the outer glove. extending at least halfway between the wrist and elbow. Gloves with elastic wristbands are specifically prohibited. Only gloves made of nonabsorbent materials such as latex, rubber, vinyl plastic, neoprene, butyl rubber, nitrile, viton, etc., are to be used. Leather gloves are not to be used. Gloves should be of the gauntlet type
Coated Work Gloves
Fully coated gauntlet
Fully coated safety gloves (band top)
Fully coated kurlwrist
17
Made with FlippingBook Digital Publishing Software