6.0 AVAILABLE OPTIONS
6.1 ABRASIVE INLET – An abrasive inlet is an additional safeguard that helps prevent erosion of filters. The inlet consists of a metal plate which absorbs the impact from abrasive materials.
6.2 ACCUMULATOR - A 30- gallon, steel constructed, air accumulator tank with 1 ½” NPT outlet. Available for ATV-18 through ATV-40.
6.3 AFH/AFS - After filter housings are available with either HEPA or Safety filters. HEPA filters are 99.97% efficient at specified flow/pressure rates and Safety filters are 95% efficient at specified flow/pressure rates.
6.4 CATWALK WITH LADDER - A catwalk with permanently affixed ladder affords safe and easy access to inspect/replace filters within the dust collector unit, when installed with the hopper option. Catwalk and ladder meet or exceed OSHA standards. 6.5 DRUM LID KIT – The drum lid kit provides a simple efficient connection from the dust collector hopper outlet to a dust storage drum. The kit includes flex hose, hose clamps, and drum lid with gasket and clamps for securing the lid to the dust storage drum.
6.6 DRUM OPTIONS - •
55 Gallon Drum 20 Gallon Drum
• •
10 Gallon Nordfab Quick Connect
6.7 DUST DRAWER - Available for ATV-8 through ATV-40
6.8 EXPLOSION VENT - An Explosion Vent is designed to relieve rapid pressure build up, as is experienced from an explosion within the dust collector. If your explosion vent should experience a burst, then contact your AMTECH Distributor to order a replacement.
6.9 FILTERS – •
Fire Retardant 80/20 Cellulose/Polyester Blend • Fire Retardant 80/20 Cellulose/Polyester Blend Wide Pleat • Fire Retardant Nanofiber • Spunbond • Other configurations available upon request
6.10 FIRE SUPPRESSION – Fire suppression is available in a variety of technologies. Fire suppression systems should be installed by qualified individuals and in accordance with any local, state, or national codes/regulations/laws (if any). 6.11 HOPPER ACCESS DOOR - When removed, the hopper access door allows the installer/operator/maintainer to view inside the hopper. If any material has accumulated on the sides or bridged across the hopper outlet, then this access point can be used to facilitate the removal of material. 6.12 PNEUMATIC VALVE KIT - A pneumatic valve kit includes a pressure regulator, coalescing filter, and pressure gage. This kit helps insure that clean dry air is being supplied to the pulse valves at the proper air pressure. NOTE: The coalescing filter requires periodic maintenance/replacement (life span is a function of supplied air quality).
6.13 SIDE INLET - Available for ATV-8 through ATV-40
Page 7
sales@clean-air.com
1-866-665-1829
www.clean-air.com
Made with FlippingBook Online newsletter maker