6.4 CATWALK WITH LADDER - A catwalk with permanently affixed ladder affords safe and easy access to inspect/replace filters within the dust collector unit, when installed with the hopper option. Catwalk and ladder meet or exceed OSHA standards. 6.5 DRUM LID KIT – The drum lid kit provides a simple efficient connection from the dust collector hopper outlet to a dust storage drum. The kit includes flex hose, hose clamps, and drum lid with gasket and clamps for securing the lid to the dust storage drum.
6.6 DRUM OPTIONS - • 55 Gallon- • 20 Gallon- •
10 Gallon Nordfab Quick Connect-
6.7 EXPLOSION VENT - An Explosion Vent is designed to relieve rapid pressure build up, as is experienced from an explosion within the dust collector. If your explosion vent should experience a burst, then contact your Clean Air Industries Distributor to order a replacement.
6.8 FILTERS - •
Fire Retardant 80/20 Cellulose/Polyester Blend • Fire Retardant 80/20 Cellulose/Polyester Blend Wide Pleat • Fire Retardant Nanofiber • Spunbond • Other configurations available upon request
6.9 FIRE SUPPRESSION – Fire suppression is available in a variety of technologies. Fire suppression systems should be installed by qualified individuals and in accordance with any local, state, or national codes/regulations/laws (if any). 6.10 HOPPER ACCESS DOOR - When removed, the hopper access door allows the installer/operator/maintainer to view inside the hopper. If any material has accumulated on the sides or bridged across the hopper outlet, then this access point can be used to facilitate the removal of material. 6.11 PNEUMATIC VALVE KIT - A pneumatic valve kit includes a pressure regulator, coalescing filter, and pressure gage. This kit helps insure that clean dry air is being supplied to the pulse valves at the proper air pressure. NOTE: The coalescing filter requires periodic maintenance/replacement (life span is a function of supplied air quality). 6.12 SILENCER - Silencers are manufactured from 11 and 14 gauge carbon steel. The silencers are lined with a minimum of 3” of a sound damp ing material. When installing a rectangular silencer, install on the flange side of the motor can. When installing a round silencer, install on top of the motor can (this may require a supplied cone to install) 6.13 SMOKE DETECTION – Smoke detectors are available in a variety of models. Smoke detectors should be installed by qualified individuals and in accordance with any local, state, or national codes/regulations/laws (if any). 6.14 SPRINKLERS - Unless otherwise requested, the sprinklers discharge at 165 o F. Sprinklers must be connected to the plant’s main sprinkler system and in accordance with any local, state, or national codes/regulations/laws (if any).
6.15 CUSTOM PAINT
Page 7
sales@clean-air.com
1-866-665-1829
www.clean-air.com
Made with FlippingBook Online newsletter maker