Industrial Grey PVC-U Pipe And Fittings PP-H (Polypropyle e)
Jointing Technologies / Installation Information
Jointing Methods
There are four weldable jointing methods available for PP-H (butt weld, socket and IR Plus fusion, BCF Plus). Each method has pros and cons. A brief overview is provided. Ordering information can be found in the machines section on pages 287 - 291.
Socket Fusion
Socket welding utilised a hand tool which used a bush and spigot arrangement at a temp of approx. 270Oc to simulta- neously heat the socket and pipe. Then is pushed together by hand. Pros: Low-tech requiring a socket fusion tool Quick assembly Cons: Delays in assembly / maintenance requiring heating up and cooling down times. Inside leaves a ring of molten plastic which may aid in friction loss Squareness and levels dependant on installers eye.
IR Welding
IR-Welding is a form of butt welding where the heater plate does not meet the pipework. It offers very repeatable weld and utilises a bench style machine. Pros: Very repeatable welding with accuracy to the mm. Weld records of each weld available. As the heater plate has no contact with pipework very little chance of impurities entering weld. Very small internal bead. Cons: Typically, a workshop machine and not suitable for site installation without a con- trolled environment. Certification required for machine
Butt Fusion Welding
The fusion areas of the pipes and fittings are heated to fusion temperature and joined by means of mechanical pressure, without using additional materials. Pros: Field units suitable for site work Cons: Leaves an internal bead within pipe. Long cool down time BCF Welding
The fusion jointing process consists in transmitting precisely defined thermal energy to the pipe and fitting ends being joined by means of half-shell heating elements. At the same time an elastic, pressurised bladder supports the inside surface of the fusion zone in order to prevent the formation of an internal fusion bead. Pros: Weld traceability No internal / external bead Great for use in pharmaceutical or electronic component production. Can be used in clean room environments Short weld times Cons: Certification required to use the machine Limited to sizes to d63mm.
1300 PIPING (1300 747 464)
V 4.4
PAAS Source Book 99
Made with FlippingBook - Online magazine maker