Aura
Operating the Projector
Switching On/Switching Off
To turn the projector on, connect the power supply cable to the inlet socket on the rear of the projector. After connecting the power, the projector will revert to whichever on/off state it was in when the power was last disconnected. If the projector was on when power was last disconnected then it will come on. If it was in standby (off) when the power was last disconnected, it will go into standby mode (light and motor off).
The ‘Manual Control Button’ next to the power socket is used to control the projector in basic (non-App) mode. To turn the projector on or off, press the button once briefly.
Dimming the Image
The projector has a bright dimmable light that is perfect in a home environment.
To dim the image in basic (non-App) mode, turn on the light (if not already on), then press and hold down the ‘Manual Control Button’. The light will gradually dim down and then back up again and will continue to do so as long as the button is held. To set your desired
Designed and Manufactured in the UK by Optikinetics
5
Made with FlippingBook - professional solution for displaying marketing and sales documents online