Angle After Torque Up After tightening by torque control, it manages extra angle control in both forward and reverse directions.
Speed
Unit rpm
Range
Initial
Tool range
0
Description
Driver rotation speed
Angle
Unit
Range
Initial
degree
0 ~ 15000
0
Description
Rotation angle
Direction
Unit
Range
Default Forward
Forward - Reverse
Description
Angle rotation direction
Thread Tapping
The thread tapping function monitors and controls torque during thread tapping of an open hole, also called through-hole tapping. Once the target end torque is detected, the standard fastening parameters will complete the fastening procedure. TC/AM program will start once the tapping is done.
Typical thread tapping graph
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
14
Made with FlippingBook Annual report maker