Clamp Control
The clamp control monitors and controls A. ensure the fastener is seated and to apply a clamp torque after seating. When the fastener head seats, a seating torque will be applied (see second fastener in image below). After the fastener ha a clamp torque will be applied to complete the rundown. The clamp control monitors and controls A. seating torque and B. clamp torque. This function is used to seating torque will be applied (see second fastener in image below). After the fastener has been seated, a clamp torque will be applied to complete the rundown. (See third fastener in image below). seating torque and B. clamp torque. This function is used to s been seated, (See third fastener in image below).
Seating torque is the torque applied when the fastener head makes initial contact with the joint. Clamp torque is the torque applied to tighten and preload the fastener after the fastener is seated. Clamp torque is applied in addition to the seating torque. (seating torque + clamp torque = total torque) torque applied to tighten and preload the fastener after the fastener is seated. Clamp torque
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292
95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
16
Made with FlippingBook Annual report maker