Command
Description
Data (range)
NOP
No operation
No use
Tool start fastening process in forward rotation - Selected Preset is fill in Data field
Fastening
Preset selection 1 to 15
Loosening
Tool start loosening process in reverse rotation
Angle in 0.1 turn up to 999
Select preset # (not mandatory ) Preset can be selected in data of Fastening command.
Select preset#
Preset selection 1 to 15
Delay
Time delay for setting time
1 to 999
Jump
Move to the setting step
2 to 9
Count value = A
Total number “A” to count
1 to 999
Subtract 1 from “A” and save the value replacing “A” . If the value “ A” is not “0”, then move to the next lower step. If the value “ A” is “0”, then move to 2 nd lower step
Sub if (A)
No use
End
Finish multi-sequence process (mandatory)
No use
Be careful: Data can be set from 0 to 999. Please set correct value in fields.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
21
Made with FlippingBook Annual report maker