Parameter for Preset T o program each presets, click Menu icon and select Parameter icon.
Parameter menu require password to log in. The initial factory setting is “ 0 “ for password The password can be changed once log in. There are .875 address for each parameters. Parameters are grouped for each settings as below.
On the log in window, there are tool information about controller firmware version, LCD firmware version and, screwdriver model, serial no., torque & speed ranges of the electric screwdriver.
Parameter group:
Please refer to the operation manual of MountzCom PC software for details of
parameter settings.
Group
Parameter
Address
1. Fastening
Preset #1 to #15
A001 – A225
Input
A226 – A233
2. I/O
Output
A234 – A241
3. Screw count
Number & cycle start
A242 – A247
4. Crow foot option
A265 – A269
5. Controller
A270 – A306
6. Network
IP address
A307– 320
7. Multi sequence
Multi-A, Multi-B
A321 – 340
8. Error
8 error history
A341 – 348
Controller model
A349
9. Model
Model #1 to 15
A350 – 649
10. Advanced Function
Advanced #1 to #15
A650 – 874
11. Firmware version
A875
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
26
Made with FlippingBook Annual report maker