Fastening errors
Code Error message
Description
How to reset
300
Run time limit (Forward)
Over time limit on A260
Resetting A260 value
301
Run time limit (Reverse)
Over time limit on A261
Resetting A261 value
302
Model setting error
Failure in Model programming
Resetting Model
303
Model cancel
The Model process is canceled
Motor stall by loosening failure
Motor stall by loosening failure within time limit on A262
304
Resetting A262 value
309
Bit socket tray
Bit socket tray application error
310
Time over in screw counting Over the time limit of screw counting on A243
Resetting A243 value
When the work-piece moves out of the working area without complete number of fastening
311
Screw missing
Target torque reached before the Min angle
330
Min Angle error
Target torque reached over the Max angle
331
Target angle setting error
Resetting target angle
Target torque reached over the Max angle
332
Angle over
Resetting max angle
Operation stops before complete cycle of torque up by releasing lever trigger
333
No torque complete
Engaging torque detection fail
The engaging torque is not detected in time or angle limit
334
Check min, max torque range
335
Converted torque error
Converted torque is out of torque limit (%)
[AC/TM] Torque reached to the high limit of torque capacity
336
Over torque error
Resetting max torque
337
Torque up at free speed
Torque up occur at Free speed
Resetting thread tap max torque
338
Thread tap max torque error Over max torque at Thread tap
Thread tap min & max range error
339
Thread tap setting min, max torque range invalid
400
Ethernet port fail
Ethernet device IC initializing fail
Ethernet communication error related with socket
401
Ethernet socket error
500
Over temperature
Overtemperature over 70°C
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
62
Made with FlippingBook Annual report maker