It is not the case in the chart (on prior page), but the tapping torque can be higher than the target torque (tapping in metal sheets, for example)
Min Thread Torque
Unit
Range
Initial
set up in controller
Tool range
0
Description
Torque level to start tapping monitoring Reach upward and higher than end torque parameter
Max Thread Torque
Unit
Range
Initial
set up in controller
Tool range
0
Description
Safety torque level - end preset with a specific alarm
Speed
Unit rpm
Range
Initial
Tool range
0
Description
Driver rotation speed
Thread Tapping End Torque Unit
Range
Initial
set up in controller
Tool range
0
Description
Torque level to end the thread tapping advance function Reach downward and lower than min thread torque parameter
Angle Start from Engaging
Unit
Range
Initial
YES - NO
NO
Description
If select, the monitoring angle count is reset and start again from engaging torque detection point.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
15
Made with FlippingBook Annual report maker