Fastening setting : The fastening with counting number follows all settings and features in Screw Count menu except the number of screw.
The spindle can be locked automatically in all steps except Fastening step, by selecting Enable on the menu Controller ‘Auto lock’ (model).
Input/Output setting: IO port used in models should be unassigned (None) in IO settings Inputs port 9 to 15 are unassigned and dedicated to models
Command details
Command Description
Data 1
Data 2
0: No output NG 1: Active High 2: Active Low 3: High status 4: Low status 0: No Output NG 1: On 2: Off 3: On for 0.5s and Off 4: On for 1.0s and Off
Input # select from 1 - 8
Input
Mapping digital Input
Output # select from 1 - 8
Output
Mapping digital Output
Preset # from 1 – 13
Fastening
Start fastening
Count number from 1 - 250
14 : MA* 15 : MB*
Delay
Delay time
-
1 to 250 (unit: 0.1s) 0.1 - 25 sec.
Barcode step data: ‘1 to 30’ registered barcode(step) ‘0’ any barcode scan
Bar code
Require bar code scan
None
* To select preset 14 and 15, please program preset 14 and 15 in a one step multi-sequence.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
19
Made with FlippingBook Annual report maker