Middle Count number: When the count number is reaches to the middle count number, count complete signal out become ON till the total count is completed.
‘Port count signal type’ setting is ignored on this features. ‘0’ : no use.
Count Port Signal Type (OUT) : Count complete signal can be set with 4 different type of signals.
Count complete (500ms)
Torque up + Count complete
Count complete (100ms) Screw missing alarm
Count Complete (500ms) : It provides 500ms of pulse type count complete signal after fasten all set numbers.
Torque up + Count Complete : It provides every pulse (0.5sec) signal of torque OK and count complete signal after fasten all set numbers.
The count complete signal will be off after reset of count number when first screw of the new work piece is tightened.
Count complete (100ms) : It provide a 100ms of pulse type count complete signal after fasten all set numbers.
Screw missing alarm : It provide a 100ms of pulse type alarm signal when screw missed in a cycle.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
24
Made with FlippingBook Annual report maker