Preset # display when power on Unit
Range 1 ~ 15
Initial
1
Description
Choice of initial preset selection on display when power on.
RS232 select
Unit
Range
Initial
MODBUS - Barcode
MODBUS
Description
RS232 Port use: for data report or barcode reader
Please ensure that baud rate is set to correct value
Comport baud rate setting
Unit
Range
Initial
bauds
9600 ~ 230400
115200
Description
RS232 communication speed To be set as computer com port:115200 bauds for MountzCom PC or barcode reader setting : 9600 bauds
Auto data output
Unit
Range
Initial OFF
OFF - ON
Description
Fastening data output automatically on every events as like run, For/Rev change, torque up, preset change, etc. Monitoring data come out through RS232 or Ethernet without data request command
Auto data output port
Unit
Range
Initial
RS232 - Ethernet
RS232
Description
Data output port selection for automatic report Auto data should be also set on
Protocol
Unit
Range
Initial
MODBUS - OPEN
MODBUS
Description
MODBUS OPENL Refer to Protocol manual
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
30
Made with FlippingBook Annual report maker