Speed Torque
① Select Preset # to modify parameter settings ② Select one of Soft & Hard joint condition when it is obviously clear or both together when it is not clear to be clarified, then click START ③ Apply screw tightening several times until there is no more parameter changing on the simulation & modification window. Be sure that the fastening condition should be same during the process. The system changes parameter values by the previous fastening data. ④ Once there is no more changes on the simulation & modification window, click STOP to finish testing. ⑤ Click APPLY to apply the settings on the simulation & modification window. The setting can be modified by manually before applying them.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
44
Made with FlippingBook Annual report maker