Barcode Step setting
Only for barcode reading used in model barcode step.
Dialog menu Identical to Barcode (refer previous page). (refer previous page).
Barcode registration # (total 30) Max 32 characters each code registration # (total 30)
Barcode registration: barcode model step
step for setting up value.
Ex: Model barcode step value set 1. If read barcode registration 1 data then model change next step.
Note for barcode reader connection:
Hardware connection on RS232 port:
Serial connection RS232 use only 2, 3 , 5 pins. Pins 2 and 3 should be switched External voltage supply is needed for RS232 barcode , 5 pins. External voltage supply is needed for RS232 barcode = reader
Barcode reader setting: See default standard parameters
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
49
Made with FlippingBook Annual report maker