KM-206 KUPOCARE Wheelchair Phone Holder (M Size Super Knuckle Arm) KUPOCARE Product Type: seating/positioning/ mobility, infant/toddler, preschool, elementary, secondary, adult Disability: physical The phone holder is compatible with 2.3- 3.3” (58 - 85 mm) wide phones and con- nects to the Wheelchair Tube Clamp base via ball head through the M size (6”) Super Knuckle Arm. The ball head on either end of the arm allows users to freely adjust the phone’s angle and can be locked into position by tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loos- ening the central knob of the arm. This set mounts a phone within a flexible 6” (15.2 cm) radius of a wheelchair tube. KM-207 KUPOCARE Wheelchair Camera Mount (M Size Super Knuckle Arm) KUPOCARE Product Type: seating/positioning/ mobility, infant/toddler, preschool, elementary, secondary, adult Disability: physical In this set, the M size (6”) Super Knuckle Arm has a ball head with 1/4 “-20 male thread on one end that is compatible with most cameras and camcorders. The two 1” aluminum ball head joints of the Super Knuckle Arm allows users to freely adjust the angle of mounted cameras and lock the position by simply tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosening the central knob of the arm. This set mounts
Product Type: seating/positioning/ mobility, infant/toddler, preschool, elementary, secondary, adult Disability: physical This S size (3”) Super Knuckle Arm has a ball head with 1/4”-20 female thread on one end that matches the universal mounting system of AbleNet switches. The two 1” aluminum ball head joints of the Super Knuckle Arm allows users to freely adjust the angle of mounted AAC switches and lock the position by simply tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosening the central knob of the arm. This set mounts an AbleNet switch or any equipment with 1/4”-20 male thread within a flexible 3” (7.6 cm) radius of a wheelchair tube. KM-205 KUPOCARE Wheelchair Tablet Mount (M size Super Knuckle Arm) KUPOCARE Product Type: seating/positioning/ mobility, infant/toddler, preschool, elementary, secondary, adult Disability: physical The tablet holder is ideal for 7 to 11 inch tablets and connects to the Wheelchair Tube Clamp base via ball head through the S size (3”) Super Knuckle Arm. The ball head on either end of the arm allows users to freely adjust the tablet’s angle and can be locked into position by tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosening the central knob of the arm. This set mounts a tablet within a flexible 3” (7.6 cm) radius of a wheelchair tube.
tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loos- ening the central knob of the arm. This set mounts a tablet within a flexible 9” (22.8 cm) radius of a wheelchair tube. KM-210 Wheelchair Phone Holder (L Size Dual Knuckle Arm) KUPOCARE Product Type: seating/positioning/ mobility, infant/toddler, preschool, elementary, secondary, adult Disability: physical The phone holder is compatible with phones 2.3” to 3.34” (58 - 85 mm) wide and connects to the Wheelchair Tube Clamp base via ball head through the L Size (9”) Dual Knuckle Arm. This arm is constructed by linking two S size arms with a 3” extension. The four ball heads of the arm allow users to adjust the mounted phones to precise positions that suit their special needs. The extension arm has three 1/4”-20 and two 3/8”-16 female thread holes that allow for mounting devices using an additional Super Knuckle Arm. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loos- ening the central knob of the arm. This set mounts a phone within a flexible 9” (22.8 cm) radius of a wheelchair tube. KM-211 Wheelchair Camera Mount (L Size Dual Knuckle Arm) KUPOCARE Product Type: seating/positioning/ mobility, infant/toddler, preschool, elementary, secondary, adult Disability: physical In this set, the L Size (9”) Dual Knuckle Arm has a ball head with 1/4”-20 male thread on one end that is compatible with most cameras and camcorders. This arm is constructed by linking two S size arms
a camera or camcorder within a flexible 6” (15.2 cm) radius of a wheelchair tube. KM-208 Wheelchair AAC Switch Mount (M Size Super Knuckle Arm) KUPOCARE Product Type: seating/positioning/ mobility, infant/toddler, preschool, elementary, secondary, adult Disability: physical This L size (9”) Super Knuckle Arm has a ball head with 1/4 “-20 female thread on one end that matches the universal mounting system of AbleNet switches. This arm is constructed by linking two S size arms with a 3” extension. The four ball heads of the arm allow users to adjust the mounted AAC switches to precise positions that suit their special needs. The extension arm has three 1/4”-20 and two 3/8”-16 female thread holes that allow for mounting devices using an additional Super Knuckle Arm. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosening the central knob of the arm. This set mounts an AbleNet switch or any equipment with 1/4”-20 male thread within a flexible 9” (22.8 cm) radius of a wheelchair tube. KM-209 KUPOCARE Wheelchair Tablet Holder (L size Super Knuckle Arm) KUPOCARE Product Type: seating/positioning/ mobility, infant/toddler, preschool, elementary, secondary, adult Disability: physical The tablet holder is ideal for 7 to 11 inch tablets and connects to the Wheelchair Tube Clamp base via ball head through the L Size (9”) Dual Knuckle Arm. This arm is constructed by linking two S size arms with a 3” extension. The four ball heads of the arm allow users to adjust the mounted tablets to precise positions that suit their special needs. The extension arm has three 1/4”-20 and two 3/8”-16 female thread holes that allow for mounting devices using an additional Super Knuckle Arm. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame
O T H E R A T
154
BACK TO CONTENTS
Closing The Gap © 2024 Closing The Gap, Inc. All rights reserved.
Made with FlippingBook Ebook Creator