Casework Installation

OVERLAPPING WALL TABLE END FILLER Overlapping end filler panels are installed overlapping the edge of a unit on one side and butts against the wall on the other side. Wall table end filler panels (Figure 17 & 18) are provided with one 3/4” cleat to attach to the wall. The filler panel is then put into position and the edges of the unit and the cleat are drilled with a 1/8” drill for #6 flat head wood screws.

DiversifiedCasework.com | info@DiversifiedCasework.com | 877.348.9663

Made with FlippingBook interactive PDF creator