INTRODUCTION We are pleased that you have chosen Diversified Casework for your new equipment, and it is our aim to give you the best available products. However, only proper installation will assure your complete satisfaction. Therefore, we have prepared this guide to aid you in the installation of you equipment. These instructions are for the installation of wood laboratory furniture assemblies. Please note the instructions contained in this booklet are basic guide-lines and are not meant to cover every situation you may be faced with during the installation process. There will be project specific conditions, which will have to be addressed as they occur. In these instances, please feel free to contact us and we will provide assistance as necessary to allow you to complete your installation. If there are any questions concerning installation or shipping problems, please contact the Installation or Customer Service Department of your local dealer. Figure 1 shows an exploded view of a typical wood item of laboratory equipment. Figure 2 is the assembled view of the same wood item Study these views carefully to fully acquaint yourself with the general scheme of laboratory equipment construction and method of joining the units together to make up a complete item of laboratory equipment. TYPICAL WOOD WALL AND FUME HOOD ASSEMBLY
Exploded view of a typical wood wall and fume hood assembly showing the various parts required to make a complete laboratory furniture assembly. (Figure 1) Installation instructions for fume hoods are not included in this installation booklet, since specific installation instructions are included with each hood type shipped.
DiversifiedCasework.com | info@DiversifiedCasework.com | 877.348.9663
Made with FlippingBook interactive PDF creator