1. Dormers
2. Gables
3. Recessed entries
4. Covered porch entries
5. Cupolas or towers
6. Pillars or posts
7. Eaves (minimum 6-inch projection)
8. Off-sets in building face or roof (minimum 16 inches)
9. Window trim
10. Bay or oriel windows
11. Balconies
12. Decorative patterns on exterior finishes (e.g., scales/shingles, wainscoting, ornamentation, and similar features)
13. Decorative cornices and roof lines (e.g., for flat roofs)
14. An alternative feature providing visual relief and detail, similar to options 1-13 above.
3. Garbage and Recycling Collection Areas. An exterior garbage and recycling collection area is required and shall be oriented away from the street. 4. Mechanical Equipment. Mechanical equipment located on the ground, such as heating or cooling equipment, pumps or generators, must be screened from the street by walls, fences, or vegetation. Landscaping and screening shall be tall enough to screen the equipment. Mechanical equipment is not permitted to be placed on roofs. Screening shall be compliant with all applicable fire codes.
4. Gated Communities. Gated communities are prohibited except as may be permitted by Chapter 4.5 Master Planned Developments.
H. Defensible Space Standards. Development is subject to the applicable defensible space standards in Chapter 3.7 SDC. [Ord. 543 § 2 (Exh. D), 2025; Ord. 526 § 3 (Exh. B), 2022; Ord. 497 § 2 (Exh. B), 2019]. 2.2.400 Pine Meadow Village Residential Single Family Sub-District (R-PMV) A. Purpose. This section provides specific development standards for the Pine Meadow Village (PMV) Subdivision, a residential sub-district, by adopting certain development standards originally approved in 1998 prior to PMV being annexed into the City limits. This sub-district is separated from the Residential (R) District due to differences in building setbacks, building height, maximum lot coverage and other development standards.
B. Development Standards. The following property development standards shall apply to all land, buildings and uses in the R-PMV Sub District:
Table 2.2.3 Development Standards in the Pine Meadow Village Sub-District
R-PMV Single Family Development Front Yard Setbacks Primary Building/Living Space (Enclosed habitable area) Side Yard Setbacks Primary Building/Living Space (Enclosed habitable area)
15 ft. min. to 20 ft. max.
6 ft. min.
0 ft. or 6 ft. for detached garage/other permitted accessory structures 6 ft. for attached garage/other permitted accessory structures
Accessory Buildings
Rear Yard Setbacks Primary Building/Living Space (Enclosed habitable area)
15 ft. for Lots 30-60; 4 ft. min. for all other Lots
Accessory Buildings
4 ft. required for alley access garage; 4 ft. min for street access parking
Detached Garage Setbacks Garage setback from main dwelling
15 ft. min. setback between main dwelling and garage 6 ft. separation between detached garages unless zero lot line attached garage.
Garage setback from neighboring garage
Development Standard
R-PMV District
Comments/Other Requirements
Minimum lot area
6,000 square feet
Lot width at front property line
Made with FlippingBook - professional solution for displaying marketing and sales documents online