4
How best to use Starver ® X
Always Test Phosphate Levels Prior To Dosing – If your pool has algae present this must be killed first to release all phosphate back into the water. Leave 24 hours and then test with a suitable phosphate test kit. High Levels of Phosphate – If your pool is experiencing very high levels of phosphate, above 6ppm in 50,000 litres of water, then bring the level down in two treatments. This will help prevent any excess cloudiness appearing in the pool water. Cloudy Pool Water – To eliminate the risk of this occurring always thoroughly backwash the filter prior to dosing and add a Lo-Chlor Mircalear Cube to the pump basket. Always run your circulation pump for 24 hours after dosing the product.
Pool Volume:
Dose:
Gallons
Litres
Initial Dose (lower by 6ppm)
Weekly Dose (lower by 1ppm)
5500
25000 50000 75000 100000
0.5L
84ml
11000 16500 22000
1L
168ml 252ml 336ml
1.5L
2L
The above table is a guide to how much product you need to dose
www.lo-chlor.co.uk
Made with FlippingBook Digital Publishing Software