What are the benefits?
• Up to 90% TDS removal • Allows whiter, brighter linens CapDI is Tunable!
CapDI is all about results! Voltea installed an IS4 CapDI system at a commercial laundry facility in the state of Georgia where we were able to gather a series of data for the analysis of comparing the TDS removal at the site before and after CapDI was installed. The below graph shows the actual data of the TDS removal with no CapDI present; the predicted TDS removal by our CapDI experts; and 4 different data sets of actual run time on the CapDI system. As shown below, before the CapDI system was installed the facility had met their 1,000 ppm TDS limit after 8 hours of run time and had to discharge. With CapDI, however, even after 12 hours the facility had not yet met their 1,000 ppm TDS limit, therefore had no need to discharge. Using CapDI for the commercial laundry application not only saves on OpEx, but also allows longer run times, thus improving profitability. • Dynamic control subscription allows continuous monitoring of water quality by our field experts • Fully automated operation; low maintenance allows launderers to focus on their daily operations Fully Automated • Up to 95% water recovery; reduces impact to municipal water sources and aquifers • CapDI is more efficient and environmentally friendly than any other traditional technology • No chemicals required; avoids polluting aquifers and permitting requirements for discharge We Take Care of the Environment • Low energy consumption; dramatic savings • High water recovery; reduces municipal water demand • Longer run times due to TDS not reaching the 1,000 ppm discharge limit, thus maximizing profit Lowest OpEx!
Cost Savings with CapDI
TDS vs. Laundering Time
1,000 ppm limit
No CapDI Predicted
Actual Run 1 Actual Run 2 Actual Run 3 Actual Run 4
Feed/Waste Water & OPEX
Made with FlippingBook - Online Brochure Maker