Availability and Cost: Contact your local Tremco Representative for pricing and availability. For the name and num- ber of your Representative, call the Roofing Division at 216/292-5000 Maintenance: Your local Tremco Roofing Representative can provide you with effective maintenance proce- dures which may vary, depending upon specific conditions. Periodic inspections, early repairs and preventive maintenance are all part of a sound roof program. Guarantee/Warranty: Tremco Inc. warrants TPA LV Single Ply Bonding Adhesive to be free of defects and to meet pub- lished physical properties when tested accord- ing to ASTM and Tremco standards. Under this warranty, any TPA LV Single Ply Bonding Adhesive product that is proved to be defective when applied in accordance to our written instructions, and in applications recommended by Tremco as suitable for this product will be replaced with like product at no charge. THIS IS BUYERS SOLE AND EXCLUSIVE REMEDY. All claims concerning product defects must be made in writing within twelve (12) months of shipment. The absence of such claims in writ- ing during this period will constitute a waiver of all claims with respect to such product. This warranty shall be IN LIEU OF any other warran- ty, express or implied, including but not limited to, any implied warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Technical Services: Your local Tremco Representative, working with the Technical Service Staff, can help analyze conditions and needs to develop recommendations for special applications. The services of the Tremco Research Center, which has earned a unique reputation in weatherproofing technology, complement and extend the services of the Tremco Technical Service staff. Statement of Policy and Responsibility: Tremco takes responsibility for furnishing quali- ty materials and for providing specifications and recommendations for their proper installation. As neither Tremco itself nor its Representatives practice architecture or engineering, Tremco offers no opinion on, and expressly disclaims any responsibility for the soundness of any structure on which its products may be applied. If questions arise as to the soundness of a struc- ture or its ability to support a planned installa- tion properly, the Owner should obtain the opinion of competent structural engineers before proceeding. Tremco accepts no liability
Physical Performance Characteristics
TPA LV Single Ply Bonding Adhesive
Property
Typical Value
Test Method
Weight/Gallon
7.08 lbs.
ASTM D244
VOC content
<200 g/L
ASTM D3960
for any structural failure or for resultant dam- ages, and no Tremco Representative is author- ized to vary this disclaimer.
3735 Green Road Beachwood, OH 44122 216-292-5000 220 Wicksteed Ave Toronto, ONT M4H 1G7 416-421-3300
6692
Rev. 12/15
Printed in USA
Made with FlippingBook - Online magazine maker