Tremco TPA Single Ply Roofing Systems Prefabricated Universal Corners
Guarantee/Warranty: Tremco, Inc. warrants Tremco TPA Single Ply Roofing Systems Prefabricated Universal Corners to be free of defects and to meet published physical properties when tested according to ASTM and Tremco stan- dards. Under this warranty, any product that is proved to be defective when applied in accor- dance with our written instructions, and in appli- cations recommended by Tremco as suitable for this product will be replaced with like product at no charge. THIS IS BUYERS SOLE AND EXCLUSIVE REMEDY. All claims concerning product defects must be made in writing within twelve (12) months of shipment. The absence of such claims in writing during this period will constitute a waiver of all claims with respect to such product. This warranty shall be IN LIEU OF any other warranty, express or implied, including but not limited to, any implied warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Technical Services: Your local Tremco Representative, working with the Technical Service Staff, can help analyze conditions and needs to develop recommendations for special applications. The services of the Tremco Research Center, which has earned a unique reputation in weatherproof- ing technology, complement and extend the serv- ices of the Tremco Technical Service staff. Statement of Policy and Responsibility: Tremco takes responsibility for furnishing quality materials and for providing specifications and recommenda- tions for their proper installation. As neither Tremco itself not its Representatives practice architecture or engineering, Tremco offers no opinion on, and expressly disclaims any responsibility for the soundness of any structure on which its products may be applied. If questions arise as to the soundness of a structure or its ability to support a planned installation properly, the Owner should obtain the opinion of competent structural engineers before proceeding. Tremco accepts no liability for any structural failure or for resultant damages, and no Tremco Representative is authorized to vary this disclaimer.
Basic Use: The Tremco TPA prefabricated corners must be used for sealing the corners of all pitch pans, curbs, and walls. They are uniform in shape and size and provide water tightness at corners formed by TPA coated metal and flashing membrane. Product Specifications: Material: TPA unreinforced membrane Size: 3 1 / 2 " (nominal) to all edges Packaging: The universal corners are packaged 4 to a unit and 20 per carton. Installation Procedures: 1. The corners shall be cut at the scored lines to form either an inside or outside corner. 2. Use proper heat welding techniques to fully weld the corner to the flashing following published Tremco specifications and details. 3. Universal Corners can only be installed by hot-air heat-welding. Availability and Cost: Contact your local Tremco Roofing Representative for pricing and availability. For the name and number of your Representative, call the Roofing Division at 216/292-5000. Maintenance: Your local Tremco Roofing Representative can provide you with effective maintenance procedures which may vary, depending upon specific conditions. Periodic inspections, early repairs and preventative maintenance are all part of a sound roof program.
Made with FlippingBook - Online magazine maker