Guarantee / Warranty: Tremco Incorporated warrants TPA Walkway Roll to be free of defects and to meet published physical properties when tested according to ASTM and Tremco standards. Under this warranty, any TPA Walkway Roll product that is proved to be defective when applied in accordance to our written instructions, and in applications recommended by Tremco as suitable for this product will be replaced with like product at not charge. THIS IS BUYERS SOLE AND EXCLUSIVE REMEDY. All claims concerning product defects must be made in writing within twelve (12) months of shipment. The absence of such claims in writing during this period will constitute a waiver of all claims with respect to such product. This warranty shall be IN LIEU OF any other warranty, express or implied, including but not limited to, any implied warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Technical Services: Your local Tremco Representative, working with the Technical Service Staff, can help analyze condition and needs to develop recommendations for special applications. The services of the Tremco Research Center, which has earned a unique reputation in weatherproofing technology, complement and extend the services of the Tremco Technical Service staff. Statement of Policy and Responsibility: Tremco takes responsibility for furnishing quality materials and for providing specifications and recommendations for their proper installation. As neither Tremco itself nor its Representatives practice architecture or engineering, Tremco offers no opinion on, and expressly disclaims any responsibility for the soundness of any structure or any components below the building structure on which its products may be applied. If questions arise as to the soundness of a structure, its ability to support a planned installation property, or whether material below the structure will be disturbed, the Owner should obtain the opinion of competent structural engineers before proceeding. Tremco accepts no liability for any failure of the structure or material below the structure for resultant damages, and no Tremco Representative is authorized to vary this disclaimer.
Physical Performance Characteristics
TPA Walkway Roll
Property
Typical Value
Test Method
Tensile, Grab
200 lbf (890 N)
ASTM D751-A
Tear Strength,
45 lbf (200 N)
ASTM D751-B
Tongue
Coefficient of
Dry 1.0 units Wet 1.3 units
ASTM C1028
Friction
Low Temp Flex
-40°F (-40°C)
ASTM D 1204
3735 Green Road Beachwood, OH 44122 216-292-5000 220 Wicksteed Ave Toronto, ONT M4H 1G7 416-421-3300
6604
Rev. 6/2016
Printed in USA
Made with FlippingBook - Online magazine maker