TremSEAL ® Pro
One Component Polyurethane Sealant
FEATURES
BENEFITS
• Ideal for moving joints or expansion
Medium modulus
• No mixing required, reducing hazards, and labor costs
One Component
• Aesthetically pleasing
Smooth tooled finish
• Can be used on vertical joints
Non-sag
• Upon curing, may be top coated
Compatible with many coatings
• Long performance life
Extreme UV exposure resistance
DESCRIPTION:
TremSEAL Pro is a high-performance, high-movement, single-component, medium-modulus, low-VOC, UV-stable, non-sag, smooth tooled finish, polyurethane sealant. TremSEAL Pro is a durable, flexible sealant that offers excellent performance in moving joints and exhibits tenacious unprimed adhesion once fully cured, to concrete, metal and wood surfaces. Typical applications for TremSEAL Pro include roof reglets, termination bars, coping joints, expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors and panels), aluminum, masonry and vinyl siding.
BASIC USES:
Not recommended for use in chlorinated, potable, heavy or waste water.
PACKAGING:
10.1 oz (300 mL) cartridges
COLOR:
White, Aluminum Stone, Bronze, Limestone
STORAGE LIFE:
1 year when stored at 40° to 100° F (5° to 43° C)
Store in original, undamaged packaging in a clean, dry, protected location with temperatures between 40° to 100° F (5° to 43° C). TremSEAL Pro meets or exceeds the requirements of the following specifications: • ASTM C920 Type S. Grade NS, Class 50, Ute NT, T, M, A, O, I • US Federal Specification TT-S-00230C, Class A type II • CAN/CGSB-19.13-M87 • International Code Council (ICC) Section R703.8 Flashing • AAMA 714-15 Specification for Liquid-Applied Flashing Substrate Preparation: Surfaces must be sound and clean. All release agents, existing waterproofing, dust, loose mortar, paints, other finishes or field applied coating must be removed. This can be accomplished with a thorough wire brushing, grinding, sandblasting, or solvent washing, depending on the contamination. Tremco recommends that surface temperatures be 40° F (5° C) or above at the time the sealant must be applied. Tooling: Is recommended immediately after application to insure firm, full contact with the joint interface. Dry tooling is preferred. For a cleaner finish, mask the sides of the joint with tape prior to filling.
APPLICATION STANDARDS:
APPLICATION:
Made with FlippingBook - Online magazine maker