Kee Safety, Inc. 100 Stradtman Street Buffalo, NY 14206
Tel: (716) 896 4949 Fax: (716) 896 5696 Toll Free: (800) 851 5181 www.keesafety.com Email: info@keesafety.com
SEPARATING PEOPLE FROM HAZARDS
Technical Information Sheet
Model STS - Skylight Fall Protection Screens for Domed Skylights
Product Description Curb Style Skylight Screen Model STS is a metal screen system that is attached to the outer frame of curb-mounted commercial skylights to protect against injuries or death from accidental falls through the lens of the skylight. Our Skylight Screen has a pat- ented, non-penetrating compression installation that eliminates the use of fasteners and tapes to hold it in place on most installations. This also precludes the possibility of leaks that could be caused by fastening the screen to the skylight frame. Construction, Materials, Installation Mounting Frame: two extruded 6005-T6 aluminum rails that rest on the outside frame of the skylight on its long sides Frame Installation: aluminum frame is connected with two 5/16” cold rolled, zinc plated threaded rods installed on the short sides of the skylight with nylon insert lock nuts and zinc-plated washers Screen Material: .187 and .250 diameter 304 stain- less steel or galvanized carbon steel wire in a 4” X 4” grid Screen Installation: screens are positioned in the channel of the aluminum frame and then locked into place with 1” aluminum clips attached to the frame
using ½” stainless steel hex head screws
Installation Time: 2 men, 20 minutes
Performance Designed and tested to comply with OSHA General Industry Standard 29 CFR 1910.23 (a)(4) and 29 CFR 1910.23 (e)(8)
Made with FlippingBook - Online magazine maker