BASIC ELECTRICAL MATERIALS AND METHODS
Section 0l750 - Page 0l750-4
G. With respect to custom-made equipment or related installations which are constructed specially for this project, the manufacturer shall certify the safety of it on the basis of test data or by providing a certification by a Nationally Recognized Testing Laboratory. Furnish copies of such certifications to
the Owner or signify by the presence of the certification on the equipment furnished.
H. Standards, Specifications and Codes: Where Electrical Standards, Federal Specifications, and Electrical Codes are referred to herein, it shall be understood that such reference is to the issue in effect at the date of the proposal, including all revisions and addenda, if any. I. Laws, Regulations, Permits and Certificates: Procure all necessary permits, paying all associated charges, and furnish the Engineer with evidence of the permits before commencing the Contract Work. Furnish Notify the inspection agency in sufficient time prior to concealment of work so that a complete rough-in inspection may be made. The material, equipment and installation shall conform to all applicable regulations and codes, a partial list being as follows: 1. The National Electrical Code, NFPA 70. 2. Pennsylvania Uniform Construction Code (UCC) – and any local amendments. 3. The Occupational Health and Safety Act (OSHA). 4. Americans with Disability Act (ADA). 5. American National Standards Institute. 6. Institute of Electrical and Electronic Engineers. 7. Standards of the National Electric Manufacturer's Association. 8. The National Fire Protection Association.
Made with FlippingBook Online newsletter maker