Community College of Allegheny County OCS Security Camera System Pittsburgh, PA
3. 4.
Marked to indicate transmission performance. Designed to snap-in to a patch panel or faceplate.
H.
Faceplate: 1. Two-port, vertical single-gang faceplates designed to mount to single-gang wall boxes. 2. Plastic Faceplate: High-impact plastic. Coordinate color with Section 262726 "Wiring Devices." 3. For use with snap-in jacks accommodating any combination of twisted pair, optical fiber, and coaxial work area cords. a. Flush mounting jacks, positioning the cord at a 45-degree angle.
2.5
GROUNDING
A. Comply with requirements in Section 270526 "Grounding and Bonding for Communications Systems" for grounding conductors and connectors. B. Comply with TIA-607-B.
2.6
IDENTIFICATION PRODUCTS
A. Comply with TIA-606-B and UL 969 for a system of labeling materials, including label stocks, laminating adhesives, and inks used by label printers.
2.7
SOURCE QUALITY CONTROL
A. Testing Agency: Engage a qualified testing agency to evaluate cables. B. Factory test multimode optical fiber cables according to TIA-526-14-B and TIA-568-C.3. C. Factory test preterminated optical fiber cable assemblies according to TIA-526-14-B and TIA- 568-C.3. D. Cable will be considered defective if it does not pass tests and inspections. E. Prepare test and inspection reports.
PART 3 - EXECUTION
3.1
WIRING METHODS
A. Wiring Method: Install cables in raceways and cable trays except within consoles, cabinets, desks, and counters. Conceal raceway and cables except in unfinished spaces.
271523-6
Made with FlippingBook Online newsletter maker