HOW TO INSTALL STANDARD MESH STAIR RAILING/ CONTINUED TREX SIGNATURE ®
Measuring Verticals
13
16
17
XX"
XX"
13. U sing the long edge of the stair template, mark the lo- cation of the end verticals on the upper and lower rails. NOTE: Mark should only be 1” max length or it will be visi- ble after installation of vertical. Measuring and Cutting Rail Gaskets
16. D etermine the angle of the railing (angle should be between 32-37 degrees). NOTE: This can easily be done with using an angle measurement app on cellular phone or using a speed square. 17. M easure distance between marks from bottom to top rail.
14
18
X˚ (angle) Side View
Upper vertical channel
Lower vertical
X˚ (angle)
14. M easure distance between marked lines on bottom rail and subtract 1/2” from this measurement.
XX"
15
XX"
Lower vertical channel
Upper vertical
X˚ (angle)
18. E nsure the verticals are oriented in the correct location, with the channels facing toward each other. Cut verticals to the dimension and at the angle provided above.
15. C ut both bottom and top rail gaskets to length from previous step.
5
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TSMSR-0125
Made with FlippingBook Digital Publishing Software