HOW TO INSTALL STANDARD MESH STAIR RAILING/ CONTINUED TREX SIGNATURE ®
Measuring and Cutting Mesh
32
Top View
30
Top View
Same distance
5/8"
Same distance
32. At inside of top rail measure UP 5/8” and mark mesh at this location. Do this at opposite end of mesh panel/ top rail. Using straight edge, mark MESH ONLY at all intersection points.
30. L ay mesh panel on top of stair rail assembly and measure so there is equal spacing between mesh panels at both top and bottom rails. Use clamp to hold mesh in place securely once dimensions are set.
33
Top View
31
Top View
Outside
Inside
5/8"
31. At inside of bottom rail, measure DOWN 5/8”and mark mesh at this location. Do this at opposite end of mesh panel/bottom rail. Using straight edge, mark MESH ONLY at all intersection points.
33. For the vertical measurements, align straight edge with OUTSIDE of one vertical and mark mesh at all intersection points. Align straight edge with INSIDE of opposite vertical and mark mesh at all intersection points.
9
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TSMSR-0125
Made with FlippingBook Digital Publishing Software