TREX SIGNATURE ® MESH STAIR RAILING Installation Instructions
HOW TO INSTALL STANDARD MESH STAIR RAILING/ CONTINUED TREX SIGNATURE ®
44
44. A ttach bottom stair rail to bottom stair brackets using two #10 x 1” self-tapping screws (provided) on each side of bracket. YOU MUST PREDRILL ALL EXISTING LOCATIONS FIRST USING 9/64” BIT THAT WAS PROVIDED
42
IN HORIZONTAL MOUNTING KITS.
46
45. Attach top stair rail to
top stair brackets using two #10 x 1” self-tapping screws (provided) on each side of bracket. YOU MUST PREDRILL ALL EXISTING LOCATIONS FIRST USING 9/64” BIT THAT WAS PROVIDED
42. .Drop assembled stair mesh rail panel into brackets. E nsure that rails are fully seated into brackets and verticals are completely seated on rails. Installing Snap-in Channel Filler
IN HORIZONTAL MOUNTING KITS.
43
Attachment of Bracket Covers, Skirts, and Caps
47
46
Signature Post
46. Attach corresponding bracket covers over opening in upper and bottom rails. 47. Attach provided post skirt to bottom of posts when using Trex Signature posts.
43. Cut snap-in channel filler to correct length and install into channels of bottom and top stair rails. Use of a rubber mallet may assist with this step. DO NOT attempt to cut short snap-in pieces with a miter saw. Use an angle grinder or hack saw only.
12
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TSMSR-0125
Made with FlippingBook Digital Publishing Software