HOW TO INSTALL STANDARD MESH STAIR RAILING/ CONTINUED TREX SIGNATURE ®
48
49
48. Attach post caps to Trex Signature posts. (Use of rubber mallet may be required for secure attachment.)
49. Attach post caps to post sleeves using
external- grade PVC construction adhesive (apply adhesive on the inside self-centering/ corner tabs).
Post Sleeve
Signature Post
HOW TO INSTALL COCKTAIL MESH STAIR RAILING TREX SIGNATURE ®
1. Installing Pressure-treated Posts, Post Sleeves, and Skirts See instructions on page 2. 2. Installing Brackets Follow previous stair instructions for the installation of desired brackets, making sure that all dimensions are calculated before installation, and ensuring deck board is placed in correct location.
IMPORTANT NOTES: » O nly for use with pressure-treated 4 x 4 post (3.5” nominal square) and 4” x 4” (102 mm x 102 mm) post sleeve. Trex Signature posts, Trex post mounts or joist mount posts cannot be used with Trex Sig- nature Cocktail Mesh stair railing. Cutting post and post sleeve only applies to the Cocktail style railing. » D O NOT CUT LOWER POST/POST SLEEVES UNTIL MESH RAIL STAIR PANEL IS FULLY INSTALLED. » T HE DECK BOARD USED IN COCKTAIL MESH STAIR WILL NEED TO TERMINATE AT THE UPPER STAIR POST AS SHOWN ABOVE. THE DECK BOARD WILL HAVE TO BE TOENAILED INTO THE SIDE OF THE POST IN THESE AREAS USING 2 APPROPRIATE COMPOSITE DECKING SCREWS – PRE-DRILLING IS RECOMMENDED. » Do Not use Enhance for top board.
13
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TSMSR-0125
Made with FlippingBook Digital Publishing Software