TREX SIGNATURE ® HORIZONTAL MESH RAILING Installation Instructions
HOW TO INSTALL MESH COCKTAIL RAILING
NOTES: » Do not use Enhance deck board for Cocktail rail applications.
» Trex Signature Cocktail Rail brackets (sold separately) are for use with either Trex Signature Cocktail or Trex Signature Traditional designs. For a 6' section, use 4 brackets and screws provided, for 8' section, use 5 brackets and screws provided. » Top Bracket Covers should be installed prior to the attachment of the deck board.
Cocktail Railing When Using Trex Signature Posts
7. S ecure boards to top
rail using Trex Signature Cocktail Bracket (sold separately). Ensure that there is a bracket at each end of the railing section, then space brackets approximately every 24" and attach with 4 screws provided.
7
NOTE: Pre-drilling before attachment is recommended.
8. Attachment of Bottom Rail Bracket Covers, Skirts, and Caps See instructions on previous page.
1. Install Signature Posts per instructions provided.
2. F ollow instruction steps 5a - 24 on pages 5-9 for installation.
Cocktail Railing When Using Trex Post Sleeves
3
4
3. M easure between posts and cut deck board to length.
IMPORTANT NOTE: » Important: ONLY for use with pressure treated 4 x 4 post (3.5" nominal square) and 4" x 4" (102 mm x 102 mm) post sleeve. Cutting post and post sleeve ONLY apply to the Cocktail style railing.
4. P lace deckboard onto top rail.
5. O n underside of deck board, mark outline of bracket cover location.
6. R emove deck board from rail. Using router bit, forstner bit, or something similar, rout out this area to allow deck board to fully seat onto top rail.
8
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TR-SIGNATUREMP-0825
Made with FlippingBook Digital Publishing Software