TREX® ROD RAIL STAIR RAILING Installation Instructions
HOW TO INSTALL ROD RAIL STANDARD STAIR RAILING/ CONTINUED TREX SIGNATURE ® Attachment of Bracket Covers, Skirts, and Caps
38
37
35
36 Signature Post
Post sleeve
Signature Post
37.A ttach post caps to Trex Signature posts. (Use of rubber mallet may be required for secure attachment.) 38.S ecure post caps with silicone or PVC adhesive (apply adhesive on the inside self-centering/corner tabs).
35.Attach corresponding bracket covers over opening in upper and bottom rails. 36.Attach provided post skirt to bottom of posts when using Trex Signature posts.
HOW TO INSTALL ROD RAIL STAIR CROSSOVER SWIVEL BRACKETS TREX SIGNATURE ®
1. Cutting
4
Upper stair bracket – top rail
Bottom Rail See instructions on page 2. 2. Install Lower Fixed Stair Brackets See instructions
Lower stair bracket – top rail
on page 3. NOTE: These are installed on all posts, including the center crossover post. Install Upper Fixed Stair Brackets
4. C enter upper stair brackets on posts below the marked lines and attach using two self-tapping screws (provided) . 5. S et bottom stair rail into bottom stair rail fixed brackets. 5
NOTE: When using a center crossover post the, upper fixed stair brackets will only be installed at the terminating upper and lower post, and not the center crossover post.
3
36" – 33-1/8" 42" – 39-1/8"
36" – 33-1/4" 42"– 39-1/4"
Upper post
Lower post
3. On Lower Post – From top of lower bracket, measure up and mark with light line (33-1/4” for 36” rail; 39-1/4” for 42” rail). On Upper Post – From top of lower (upper) bracket, measure up and mark with light line (33-1/8” for 36”rail; 39-1/8” for 42” rail).
8
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TRRSR-0422
Made with FlippingBook - PDF hosting