WS Workwear Catalogue

CARE AND MAINTENANCE

WASHING INSTRUCTIONS

RECOMMENDATIONS TO PROLONG THE LIFE OF YOUR GARMENTS!

COTTON DRILL

QUICK TIPS

WARM MACHINE WASH DO NOT WASH OVER 60˚C

Always follow instructions on all care labels attached to the garment. Dry and store safety hi vis garments away from sources of heat and light. Inspect regularly for garment serviceability, excessive fading, mechanically damaged components or dirt/soiling.

WASH GARMENT SEPARATELY BEFORE FIRST USE WASH GARMENT WITH SIMILAR COLOURS AND GARMENTS FOR CONSECUTIVE WASHES.

DO NOT USE BLEACH OR WHITENERS THIS INCLUDES SOAKERS OR DOMESTIC DETERGENTS CONTAINING WHITENERS

LINE DRY IN SHADE AVOIDING PROLONGED TIME IN SUNLIGHT REDUCES COLOUR FADING

SPECIAL NOTES

If any of the above is not followed, it may result in garment non-conformance to specified Australian Standards and therefore should be replaced. We recommend a critical garment examination every 3-6 months intervals.

MAY BE TUMBLE DRIED ON WARM SETTING

HOT IRON ON REVERSED SIDE DO NOT IRON TAPE IF APPLICABLE

FR GARMENTS

GARMENTS TRIMS

Flame resistant garments require special laundering and care to optimise their performance and prolong the protective quality of the fabrics.

Just like fabrics, components like reflective tape, polyester patches and other trims require care. Here are some extra tips:

Where possible, you should wash the garment inside out. This helps protect trims for any abrasion and avoid any bleeding of colours.

WARM MACHINE WASH DO NOT WASH OVER 60˚C WASH GARMENT SEPARATELY BEFORE FIRST USE WASH GARMENT WITH SIMILAR COLOURS OR WITH OTHER FR GARMENTS DO NOT USE BLEACH OR WHITENERS THIS INCLUDES SOAKERS DO NOT USE FABRIC SOFTENERS ON FR GARMENTS DO NOT USE ACID RINSE (e.g. vinegar, citric acid, acetic acid or any acid mostly used in commercial laundering)

Do not use fabric softener on reflective tape garments. Excessive amounts of fabric softener may significantly damage the reflectivity of the tape.

DO NOT TUMBLE DRY HOT OR DO NOT OVER DRY OTHERWISE IT WILL RESULT IN EXCESSIVE SHRINKAGE

WARM IRON ON REVERSED SIDE DO NOT IRON TAPE IF APPLICABLE

91

wsworkwear.com.au

Made with FlippingBook - Online Brochure Maker