TREX SIGNATURE ® HORIZONTAL RAILING Installation Instructions
HOW TO INSTALL HORIZONTAL RAILING POST TO CROSSOVER POST/ CONTINUED TREX SIGNATURE
Attachment of Bracket Covers, Skirts, and Caps
21
21. F or crossover post
configuration, attach crossover post cap to crossover post.
17
18 Trex
Signature post
17. A ttach corresponding bracket covers over opening in upper and bottom rails. 18. A ttach provided post skirt to bottom of posts when using Trex Signature posts.
19
20
Post sleeve
Trex Signature post
19. Attach post caps to Trex Signature posts. (Use of rubber .mallet may be required for secure attachment). 20.Attach post caps to post sleeves using external grade PVC construction adhesive (apply adhesive on the inside self-centering corner tabs).
HOW TO INSTALL HORIZONTAL RAILING CROSSOVER POST TO CROSSOVER POST– TREX SIGNATURE STANDARD NOTES: » TREX SIGNATURE RAILINGS ARE DESIGNED TO BE ATTACHED WITH POSTS
INSTALLED AT A CLEAR SPAN OF 6' (1.83 M) OR 8' (2.44 M). » IF INSTALLING AT EXACT SPAN LENGTHS OF 6' (1.83 M) OR 8'
(2.44 M), AND USING POST-TO-CROSSOVER POST CONFIGURATION, THE BOTTOM RAIL WILL NOT NEED TO BE CUT, BUT THE TOP RAIL WILL NEED TO BE MEASURED (MAKING SURE BALUSTERS LINE UP VERTICALLY) AND CUT. » FOR ODD SPAN LENGTHS, BOTH TOP RAIL AND BOTTOM RAIL WILL NEED TO BE MEASURED (MAKING SURE BALUSTERS LINE UP VERTICALLY) AND CUT. ENSURE THAT BALUSTERS ARE SPACED WITH AN EQUAL DISTANCE ON EACH SIDE OF THE POST. » WHEN RAILINGS ARE CUT TO ODD SPANS, ALL SPANS GREATER THAN 5' (1.52 M) (EXAMPLE: 8' (2.44 M) SPAN CUT INTO ONE 5' (1.52 M) SPAN AND ONE 3' (0.91 M) SPAN) WOULD REQUIRE FOOT BLOCK UNDER 5' (1.52 M) SPAN SINCE SMALLER FIXED BALUSTER IS NO LONGER CENTERED.
12
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TR-HZSIGNATURE-0323
Made with FlippingBook Online newsletter maker