ATTACHING STAIR SWIVEL/COMPOUND SWIVEL BRACKETS AND RAILS TO POSTS AND PRESSURE-TREATED POST AND POST SLEEVES/ CONTINUED TREX SIGNATURE
Mounting Holes
15
12
12. R emove upper stair rail from balusters and center upper stair swivel bracket on post above the marked line and attach using four self-tapping screws (provided) .
15. Attach “crowned” upper stair rail cover to upper stair rail by aligning cover on one side of rail. Then starting from one end of stair rail, snap cover onto opposing slot working down length of stair rail. GENTLE tapping with a rubber mallet may facilitate fastening. Installing Balusters into Bottom Stair Rail
13
Standard post
17
16
Standard post
13. Cut top rail along with rail insert to the measurement between the top stair swivel brackets. For standard post to standard post configurations this would be same dimensions as that of the bottom stair rail. 14. Mark and cut top rail
16. P lace balusters into holes in lower stair rail by snap- ping fully into place. In some cases, GENTLE tapping with a rubber mallet may facilitate fastening. Attaching Upper Stair Rails 17. Working from one end of upper stair rail, snap balusters into upper stair rail working down length of rail. 18. Attach top stair rail
cover same length as top rail for all top rail configurations.
14
18
to top stair bracket (all types) using two self-tapping screws (provided) on each side of stair bracket.
9
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TR-SIGN-ST-0422
Made with FlippingBook Online newsletter maker