TREX SIGNATURE ® HORIZONTAL RAILING Installation Instructions
HOW TO INSTALL HORIZONTAL RAILING POST TO POST/ CONTINUED TREX SIGNATURE
16
21
20
16. Using a 7/64" (0.28 cm)
drill bit, pre-drill at marked location for attachment of railing to bracket. Attach upper rail to each bracket by installing screws diagonally through upper rail into bracket using two self-tapping screws each side (provided) .
Post sleeve
® Trex Signature ™ post
2
7/64" (.28 cm)
1
20. .Attach post caps to Trex Signature posts. (Use of rubber m. allet may be required for secure attachment.) 21. A ttach post caps to post sleeves using external grade PVC construction adhesive (apply adhesive on the inside self-centering/corner tabs).
NOTE: Pre-drilling is required.
17
17. A ttach “crowned” upper rail cover to upper rail by aligning cover on one side of rail. Then starting from one end of rail, snap cover onto opposing slot working down length of rail. GENTLE tapping with a rubber mallet may facilitate fastening.
Attachment of Bracket Covers, Skirts, and Caps
18
19
Trex Signature ™ post ®
18. A ttach corresponding bracket covers over opening in upper and bottom rails. 19. A ttach provided post skirt to bottom of posts when using Trex Signature posts.
8
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TR-HZSIGNATURE-0323
Made with FlippingBook Online newsletter maker