DRILLING / FASTENING / NAILING
172
(1”) Square Drive Impact Wrench
TW1000
Max. capacities standard bolt Max. capacities high tensile bolt Square drive No load speed
153
M24 - M30
M22 - M24
25.4mm (1”)
1,400rpm 1,500ipm 1,000Nm 1,200W
Impact rate
Max. fastening torque Continuous rating input
Overall length
382mm
Net weight
8.4kg 2.0m
Rocker type reversing switch with side handle Capacity of M24 - M30 standard bolts and M22 - M24 high tensile bolts 1,200W* motor outputs a powerful 1000Nm of max. fastening torque Rubber bumper protection front/rear and on the base of the handle
Power supply cord
*Continuous rating input Standard: 41mm Socket (134872-2), Grip, Case
Pneumatic 23Ga Pin Nailer
AF353
Fastener range
15 - 35mm 65 - 100psi
Operating air pressure Magazine capacity
130pcs
Fastener type Overall length
23Ga
208mm
Net weight
0.9kg
Drive Nails 15 - 35mm in length with 130 nail magazine capacity Ergonomic lightweight design 0.45 - 0.69MPa (65 - 100psi) operating pressure Anti-dry fire mechanism Standard: Air Nailer Oil, 2 x Nose Cap, Safety Goggles
Pneumatic 18Ga C1 Brad Nailer
AF506
Fastener range
15 - 50mm 70 - 120psi
Operating air pressure Magazine capacity
100pcs 18 Ga 250mm
Fastener type Overall length
Net weight
1.3kg
Drive Nails 15-50mm in length with 100 nail magazine capacity Tool-less nail jam clearing and depth adjustment 0.49-0.83MPa (70-120psi) operating pressure Easy-to-see slim nose tip Air blower cleans material of dust and chips from workpiece Standard: Oil, Nose Cap, Safety Goggles
Made with FlippingBook - Online Brochure Maker