CARE & MAINTENANCE RECOMMENDATIONS TO PROLONG THE LIFE OF YOUR GARMENTS QUICK TIPS Always follow instructions on all care labels attached to the garment. Each material has their own specific instructions, however the most basic are shown below:
WARM MACHINE WASH DO NOT WASH OVER 40˚C
WASH GARMENT SEPARATELY BEFORE FIRST USE WASH GARMENT WITH SIMILAR COLOURS AND GARMENTS FOR CONSECUTIVE WASHES.
DO NOT USE BLEACH OR WHITENERS THIS INCLUDES SOAKERS OR DOMESTIC DETERGENTS CONTAINING WHITENERS
LINE DRY IN SHADE AVOIDING PROLONGED TIME IN SUNLIGHT REDUCES COLOUR FADING REVERSE GARMENT INSIDE OUT
MAY BE TUMBLE DRIED ON LOW SETTING REFER TO INDIVIDUAL CARE INSTRUCTIONS, SOME GARMENTS IS RECOMMENDED TO DO NOT TUMBLE DRY
HOT IRON ON REVERSED SIDE REFER TO INDIVIDUAL GARMENT CARE INSTRUCTIONS. SOME GARMENTS IS RECOMMENDED TO: DO NOT IRON DO NOT IRON TAPE IF APPLICABLE DO NOT IRON TRIMS
SPECIAL NOTES - XENON
• Dry and store safety hi vis garments away from sources of heat and light. • Inspect regularly for garment serviceability, excessive fading, mechanically damaged components or dirt/soiling. • We recommend a garment examination every 3-6 months. • If any of the above is not followed, it may result in garment non- conformance to specified Australian Standards and therefore should be replaced.
GARMENTS TRIMS
Just like fabrics, components like reflective tape, polyester patches and other trims require care. Here are some extra tips: • Where possible, you should wash the garment inside out. This helps protect trims for any abrasion and avoid any bleeding of colours. • Do not use fabric softener on reflective tape garments. Excessive amounts of fabric softener may significantly damage the reflectivity of the tape.
MACK WORKWEAR CATALOGUE 31
Made with FlippingBook - Online Brochure Maker