Trex Signature® Glass Railing Installation Instructions

TREX SIGNATURE ® HORIZONTAL GLASS RAILING Installation Instructions

HOW TO INSTALL HORIZONTAL FIXED BRACKETS TREX SIGNATURE ® NOTES: »  F OR EASE OF INSTALLATION, IT IS RECOMMENDED TO USE THE TREX SIGNATURE RAIL TEMPLATES TO ATTACH BRACKETS (SOLD SEPARATELY). »  T REX SIGNATURE POSTS CAN ALSO BE PURCHASED SEPARATELY WHICH HAVE BRACKETS PREINSTALLED, THUS SKIPPING STEPS 1-4.

Attach Brackets Using Trex Signature Posts TIP: Use a clamp to help hold brackets in place while fastening with screws.

Attach Brackets Using Pressure-Treated Posts and Post Sleeves TIP: Use a clamp to help hold brackets in place while fastening with screws.

1

1. Measure 1-3/8"

1

(3.5 cm) from top of post base plate or 1-7/8" (4.8 cm) from decking surface. Mark with light line.

2-1/2" Post

1-3/8" (3.5 cm)

1. Measure 1-7/8"

1-7/8" (4.8 cm)

(4.8 cm) up from deck surface to bottom of bracket. Slide skirt up to allow for proper measurement. Mark with light line.

2

3

33-7/16" (84.9 cm) or 39-7/16" (100.2 cm)

3

2

33-15/16" (86.2 cm) or 39-15/16" (101.4 cm)

2. M easure up from post base plate 33-7/16" (84.9 cm) for 36" (92 cm) rail height or 39-7/16" (100.2 cm) for 42" (107 cm) rail height. Mark with light line. NOTE: If measuring from decking surface, measure up 33-15/16" (86.2 cm) for 36" (92 cm) rail height or 39-15/16" (101.4 cm) for 42" (107 cm) rail height. 3. C enter lower bracket on post above the marked line and attach using (2) self-tapping screws (provided) . 4. C enter upper bracket

2. M easure up from decking surface 33-15/16" (86.2 cm) for 36" (92 cm) rail height or 39-15/16" (101.4 cm) for 42" (107 cm) rail height. Mark with light line.

NOTE: Push skirt back down onto surface of decking BEFORE ATTACHING BRACKETS.

3. C enter lower bracket on post above the marked line and attach using two 2" (51 mm) wood screws (provided) . 4. C enter upper bracket 4

4

on post above marked line and attach using (3) self-tapping screws (provided) . NOTE: Upper bracket is not required on crossover post configuration.

on post above marked line and attach using three 2" (51 cm) wood screws (provided) .

2

Have Questions? 1–800–BUY–TREX

NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com

THGR-0323

Made with FlippingBook - PDF hosting