ENGLISH
3.2 UNPACKING YOUR SYSTEM The crate used to package your system uses compression clips that secure the top and side walls to the base. Use caution when removing these clips since they are under compression force. WARNING The crate's top and walls are secured in place using compression clamps. When unsnapping these clamps place one hand over the clamp as you remove the clamp from its groove. This will prevent the clamp from becoming air borne.
4.2 STARRETT RESPONSIBILITIES Starrett recommends that an authorized Starrett Representative take responsibility for the unpacking, siting, installation and commissioning of your FMS force measurement system. Starrett or an authorized Starrett Representative will: • Install the machine, its components and any additional accessories that were purchased from Starrett or your Starrett Dealer. IMPORTANT The customer must NOT attempt to install the machine without a Starrett Representative present. • Perform an initial operation of the system and a verification check to ensure that the system is working properly and measuring accurately. • Performa customer demonstration that describes how to operate the system. IMPORTANT Starrett recommends that customers purchase a one-day hands-on training session for all customer personnel who will operate the equipment. • Supply documentation on the operation of the system including manuals and user guides.
• Remove the clamps that secure the top of the crate first. • Remove the top cap. Leave the foam insert in place.
• Remove the right-hand side clamps. Exercise caution since the side clamps secure both the side and front and back side of the crate. • Remove the left-hand side clamps. Remove the side walls to the crate. • Remove the foam inserts. • Remove the Accessory boxes. NOTE Save the crate in case you need to store or ship your FMS frame at a later date. 3.3 POSITIONING YOUR SYSTEM FOR USE Using at least two (2) adults, firmly grasp the frame base. Lift the frame off of the base of the crate. Place the frame on to its operating position. 4.0 INSTALLATION This section will provide you with installation guidelines for your FMS force measurement system. Starrett recommends that your authorized Starrett Representative be responsible for installing and commissioning your system at your location. NOTE Starrett recommends that your authorized Starrett Representative installs and commissions your FMS force measurement system. 4.1 CUSTOMER RESPONSIBILITIES As the customer for this product, you are responsible for: • Insurance and safety responsibilities during installation and operation of this precision instrument. • Arrange to off-load and unpack the equipment using qualified personnel or an authorized Starrett Representative. • Transportation of the equipment to its intended test location. This includes responsibility for any special handling or rigging considerations. • Preparation of the test site including the physical, electrical and environmental considerations. • Proper disposal of any waste materials generated from the installation.
PKG08823 -UMFMS 11
Made with FlippingBook - professional solution for displaying marketing and sales documents online