ENGLISH
4.5.2 INSTALLING BASE CLEVIS ASSEMBLY Your FMS frame's base has a metric threaded M6 or M12 hole. The Base Clevis is used to fit your testing fixtures. The Base Clevis has either an M6 or M12 male threaded screw connector. To attach the Base Clevis, screw the Base Clevis into the base hole.
4.5.3 INSTALLING FLC LOAD CELL SENSOR The FLC load cell sensor connects to the FMS frame's crosshead. The FMS500 has a hole clearance that accepts an M6 hex screw and locking washer. The FMS1000, FMS2500 and FMS5000 are supplied with two bushings that fit into a hole the crosshead. The bushing are sized to fit an M6 or M12 hex screw and locking washer. Your load cell sensor will dictate what size screw is necessary to attach your sensor to the crosshead.
Load Cell Sensor Connector
CAUTION Starrett recommends that you turn power on your FMS Series system OFF when connecting your load cell sensor. 4.5.4 INSTALLING LOAD CELL CLEVIS ASSEMBLY The Load Cell Clevis is the same as the Base Clevis. It attaches to the load cell sensor's female metric thread. IMPORTANT Exercise caution when threading the clevis onto your load cell sensor. Avoid applying excess torque that can damage the sensor's internal electronic circuit.
PKG08823 -UMFMS 13
Made with FlippingBook - professional solution for displaying marketing and sales documents online