ENGLISH
8.2.2 EMERGENCY STOP • Verify that the Emergency Stop Switch is in the ON position. • Press the jog switch. The crosshead should not move since the Emergency Stop is in the down (ON) position. • Press and release the Emergency Stop Switch so that the switch is UP and in the OFF position. • Press the jog switch. The crosshead should move freely.
8.2.3
FUSE REPLACEMENT
WARNING Electrical Hazard. Make sure to shut all power to your FMS force measurement system to OFF. Dangerous voltage may cause personal injury. • Turn the power switch on the back panel of the FMS frame to the OFF position. • Disconnect the power cord from the power source. • Replace the fuse with the same type and size as the original. • Remove the protective cap that covers the fuse compartment. • Grasp and remove the fuse holder. • Remove the fuse. • Install a new fuse into the holder. The replacement fuse needs to be the factory-specified type and rating as original. An incorrect fuse may damage the electrical circuits inside your machine. • Re-insert the fuse holder. • Place the protect cap back onto the fuse compartment. • Reconnect the power cable. • Turn power to the systemONby placing the power switch in the ONposition.
24 PKG08823 -UMFMS
Made with FlippingBook - professional solution for displaying marketing and sales documents online