ENGLISH
5.0 FMM CONTROLS This section will describe the controls used with your FMM force measurement system to perform tests. 5.1 POWER SWITCH The main power switch for your FMM frame is located on the back of the machine. • Connect the machine to a source power outlet. • Turn the On/Off switch to the ON position to operate. • When your machine is not being used, turn the power switch to the OFF position.
5.2 EMERGENCY STOP SWITCH The Emergency Stop Switch is located on the left-hand side of the FMM base. This switch interrupts power to the electrical drive system and brings the system to a stop as quickly as possible. CAUTION Engaging the Emergency Stop Switch does not remove power to the system. When the Emergency Stop Switch is engaged, power to the drive system is interrupted. No crosshead movement is possible. When operated, the Emergency Stop Switch locks down into a closed position. The crosshead movement is disabled. To reset or disengage the Emergency Stop Switch, press down and turn counter-clockwise. The switch will release upwards and return power to the drive system. 5.3 JOG KEYS The Jog Keys lets you move the crosshead UP and DOWN. When using the Jog Keys, pressing the key cause the crosshead velocity to increase from zero to full velocity (40 inches per minute / 1016mm per minute) in about 3 seconds. You may restrict the maximum velocity using the L1 Motion Settings. JOG UP - press the up portion of the switch to cause the crosshead to move upward. Release the switch to stop motion. JOG DOWN - press the down portion of the switch to cause the crosshead to move downward. Release the switch to stop motion.
Shown: Power On/Off Switch on back of FMM
Display
Emergency Stop Switch
Jog Keys Up/Down
Selector Knob
Shown: FMM Front Panel Controls
16 PKG08813-UMFMM
Made with FlippingBook - professional solution for displaying marketing and sales documents online